TO STAIN FLEX MOULDING:
1. Finish and sand, like wood, using a filler that matches stain color and will adhere to an oil based man-made product.
2. Apply a pre-packaged "Base Coat Latex Glazing Fluid." Many manufactures offer these specific finishes for this purpose. After applying, wipe gently with a clean cloth. Re-apply stain as many times as needed to develop depth of color.
3. After the glaze has been wiped to the desired appearance, it must be allowed to dry and then sealed with the same top coat being used on the wood.
4. We strongly recommend that first time users practice on a piece of scrap flex moulding before finishing the moulding being used on the job.
we are only a phone call away